 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| STGB10NC60KD STGF10NC60KD - STGP10NC60KD N-channel 600V - 10A - D2PAK / TO-220 / TO-220FP Short circuit rated PowerMESHTM IGBT General features Type STGB10NC60KD STGP10NC60KD STGF10NC60KD VCES 600V 600V 600V VCE(sat)Max @25C <2.5V <2.5V <2.5V IC @100C 10A 10A 6A 3 1 2 1 3 2 TO-220 TO-220FP Lower on voltage drop (Vcesat) Lower CRES / CIES ratio (no cross-conduction susceptibility) Very soft ultra fast recovery antiparallel diode Short circuit withstand time 10s 3 1 DPAK Description Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the PowerMESHTM IGBTs, with outstanding performances. The suffix "K" identifies a family optimized for high frequency motor control applications with short circuit withstand capability. Internal schematic diagram Applications High frequency motor controls SMPS and PFC in both hard switch and resonant topologies Motor drivers Order codes Part number STGB10NC60KDT4 STGP10NC60KD STGF10NC60KD Marking GB10NC60KD GP10NC60KD GF10NC60KD Package DPAK TO-220 TO-220FP Packaging Tape & reel Tube Tube February 2007 Rev 5 1/17 www.st.com 17 Contents STGB10NC60KD - STGP10NC60KD - STGF10NC60KD Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1 Electrical characteristics (curves) ............................. 7 3 4 5 6 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2/17 STGB10NC60KD - STGP10NC60KD - STGF10NC60KD Electrical ratings 1 Electrical ratings Table 1. Symbol VCES IC(1) IC(1) ICM(2) VGE IF PTOT VISO Tstg Tj Tscw Tl Absolute maximum ratings Value Parameter DPAK/TO-220 TO-220FP Collector-emitter voltage (VGS = 0) Collector current (continuous) at TC = 25C Collector current (continuous) at TC = 100C Collector current (pulsed) Gate-emitter voltage Diode RMS forward current at Tc=25C Total dissipation at TC = 25C Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1s;TC=25C) Storage temperature - 55 to 150 Operating junction temperature Short circuit withstand time Maximum lead temperature for soldering purpose (for 10sec. 1.6 mm from case) T -T JMAX C I ( T ) = ----------------------------------------------------------------------------------------------------CC R xV (T , I ) THJ - C CESAT ( MAX ) C C Unit 600 20 10 30 20 10 60 -25 2500 9 6 V A A A V A W C s C 10 300 1. Calculated according to the iterative formula: 2. Pulse width limited by max junction temperature Table 2. Symbol Rthj-case Rthj-amb Thermal resistance Parameter TO-220/DPAK Thermal resistance junction-case Max TO-220FP Thermal resistance junction-ambient Max 5.0 62.5 C/W C/W Value 2.08 Unit C/W 3/17 Electrical characteristics STGB10NC60KD - STGP10NC60KD - STGF10NC60KD 2 Electrical characteristics (TCASE=25C unless otherwise specified) Table 3. Symbol VBR(CES) VCE(sat) VGE(th) ICES IGES gfs Static Parameter Collector-emitter breakdown voltage Test conditions IC= 1mA, VGE= 0 Min. 600 2.2 1.8 4.5 2.5 Typ. Max. Unit V V V V A mA nA S Collector-emitter saturation VGE= 15V, IC= 5A voltage VGE= 15V, IC= 5A, Tc= 125C Gate threshold voltage Collector cut-off current (VGE = 0) Gate-emitter leakage current (VCE = 0) Forward transconductance VCE= VGE, IC= 250 A VCE= Max rating,TC= 25C VCE=Max rating,TC= 125C VGE= 20V, VCE= 0 VCE = 15V, IC= 5A 6.5 150 1 100 15 Table 4. Symbol Cies Coes Cres Qg Qge Qgc Dynamic Parameter Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-emitter charge Gate-collector charge Test conditions VCE = 25V, f = 1MHz, VGE = 0 VCE = 390V, IC = 5A, VGE = 15V, (see Figure 18) Min. Typ. Max. 380 46 8.5 19 5 9 Unit pF pF pF nC nC nC 4/17 STGB10NC60KD - STGP10NC60KD - STGF10NC60KD Electrical characteristics Table 5. Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on tr(Voff) td(off) tf tr(Voff) td(off) tf Switching on/off (inductive load) Parameter Turn-on delay time Current rise time Turn-on current slope Test conditions VCC = 390V, IC = 5A , RG= 10 VGE= 15V, Tj= 25C (see Figure 19) VCC = 390V, IC = 5A , RG= 10 VGE= 15V, Tj=125C (see Figure 19) Vcc = 390V, IC = 5A, , RGE = 10 VGE = 15V,TJ=25C (see Figure 19) Vcc = 390V, IC = 5A, , RGE=10 VGE =15V, Tj=125C (see Figure 19) Min. Typ. 17 6 655 Max. Unit ns ns A/s Turn-on delay time Current rise time Turn-on current slope 16.5 6.5 575 ns ns A/s Off voltage rise time Turn-off delay time Current fall time 33 72 82 ns ns ns Off voltage rise time Turn-off delay time Current fall time 60 106 136 ns ns ns Table 6. Symbol Eon(1) Eoff(2) Ets Eon(1) Eoff(2) Ets Switching energy (inductive load) Parameter Turn-on switching losses Turn-off switching losses Total switching losses Turn-on switching losses Turn-off switching losses Total switching losses Test conditions VCC = 390V, IC = 5A RG= 10 VGE=15V, Tj=25C , (see Figure 19) VCC = 390V, IC = 5A , RG= 10 VGE= 15V, Tj= 125C (see Figure 19) Min. Typ. 55 85 140 87 162 249 Max. Unit J J J J J J 1. Eon is the tun-on losses when a typical diode is used in the test circuit in figure 2. If the IGBT is offered in a package with a co-pak diode, the co-pack diode is used as external diode. IGBTs & Diode are at the same temperature (25C and 125C) 2. Turn-off losses include also the tail of the collector current 5/17 Electrical characteristics STGB10NC60KD - STGP10NC60KD - STGF10NC60KD Table 7. Symbol Vf trr Qrr Irrm trr Qrr Irrm Collector-emitter diode Parameter Forward on-voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current Test conditions If = 2.5A If = 2.5A, Tj = 125C If = 5A,VR = 30V, Tj = 25C, di/dt = 100 A/s (see Figure 20) If = 5A,VR = 30V, Tj =125C, di/dt = 100A/s (see Figure 20) Min. Typ. 1.6 1.3 23.5 16.5 1.4 39 39 2 Max. 2.1 Unit V V ns nC A ns nC A 6/17 STGB10NC60KD - STGP10NC60KD - STGF10NC60KD Electrical characteristics 2.1 Figure 1. Electrical characteristics (curves) Output characteristics Figure 2. Transfer characteristics Figure 3. Transconductance Figure 4. Collector-emitter on voltage vs temperature Figure 5. Gate charge vs gate-source voltage Figure 6. Capacitance variations 7/17 Electrical characteristics Figure 7. STGB10NC60KD - STGP10NC60KD - STGF10NC60KD Figure 8. Collector-emitter on voltage vs collector current Normalized gate threshold voltage vs temperature Figure 9. Normalized breakdown voltage vs temperature Figure 10. Switching losses vs temperature Figure 11. Switching losses vs gate resistance Figure 12. Switching losses vs collector current 8/17 STGB10NC60KD - STGP10NC60KD - STGF10NC60KD Figure 13. Thermal impedance for TO-220/ DPAK Electrical characteristics Figure 14. Turn-off SOA Figure 15. Emitter-collector diode characteristics Figure 16. Thermal impedance for TO-220FP 9/17 Test circuit STGB10NC60KD - STGP10NC60KD - STGF10NC60KD 3 Test circuit Figure 18. Gate charge test circuit Figure 17. Test circuit for inductive load switching Figure 19. Switching waveform Figure 20. Diode recovery time waveform 10/17 STGB10NC60KD - STGP10NC60KD - STGF10NC60KD Package mechanical data 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 11/17 Package mechanical data STGB10NC60KD - STGP10NC60KD - STGF10NC60KD TO-220 MECHANICAL DATA DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154 oP Q 12/17 STGB10NC60KD - STGP10NC60KD - STGF10NC60KD Package mechanical data D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 0 4.88 15 1.27 1.4 2.4 0.4 4 10 8.5 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10.4 0.393 0.334 0.208 0.625 0.055 0.068 0.126 TYP MAX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 inch 3 1 13/17 Package mechanical data STGB10NC60KD - STGP10NC60KD - STGF10NC60KD TO-220FP MECHANICAL DATA mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409 DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O A B L3 L6 L7 F1 F D G1 H F2 L2 L5 E 123 L4 14/17 G STGB10NC60KD - STGP10NC60KD - STGF10NC60KD Packaging mechanical data 5 Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956 BASE QTY 1000 * on sales type 15/17 Revision history STGB10NC60KD - STGP10NC60KD - STGF10NC60KD 6 Revision history Table 8. Date 14-Jun-2005 19-Jul-2005 27-Jan-2006 01-Mar-2006 08-Feb-2007 Revision history Revision 1 2 3 4 5 New release Complete version Inserted ecopack indication The document has been reformatted Modified value on Table 5.: Switching on/off (inductive load) Changes 16/17 STGB10NC60KD - STGP10NC60KD - STGF10NC60KD Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 17/17 |
Price & Availability of STGF14NC60KD
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |